Installing C Series Modules
Complete the following steps to install a C Series module.
3
2
2
1
1. Verify that power is not connected to the I/O connector(s) on the C Series
module. If the system is in a nonhazardous location, the cRIO-9036 can be
powered on when you install modules.
2. Press the latches on the C Series module.
3. Align the C Series module with a slot and seat it in the slot until the latches
lock in place.
Removing C Series Modules
Verify that power is not connected to the I/O connector(s) on the C Series module
before you remove a module from the cRIO-9036. If the system is in a nonhazardous
location, the cRIO-9036 can be powered on when you remove modules.
Connecting the cRIO-9036
The cRIO-9036 has the following connectors, LEDs, and buttons.
© National Instruments
9
cRIO-9036 Getting Started
