©
National Instruments Corporation
9
NI CB-2162 User Guide
Using 1 × 2 Header Receptacles
Each signal and ground header pair is labeled on the NI CB-2162 and in
Figure 1. These header pairs are arranged so that you can make quick
connections using a 1 × 2 header receptacle to a coaxial cable assembly.
Note
Header receptacle assemblies are not included with the NI CB-2162, but you can
create custom assemblies by purchasing parts from vendors such as 3M.
Connectivity is made by inserting the receptacle onto the appropriate
header pair. Refer to the receptacle documentation to assure that proper
connections are made to signal and ground.
Figure 4 shows how to make 1 × 2 header receptacle connections.
Figure 4.
1 × 2 Header Receptacle
1
1 × 2 Header Receptacle
2
Header Pin Pair
2
1
DIO
