NI CB-2162 User Guide
18
ni.com
2.
Remove the eight 4-40 × 1/4 in. flathead Phillips-head screws from the
top cover of the CA-1000, as shown in Figure 11.
3.
Remove the top cover.
Figure 11.
Remove Cover from CA-1000 Enclosure
Refer to Figure 12 as you complete the following steps.
4.
Screw the standoffs onto the threaded screws in the locations shown in
Figure 12.
5.
Position the NI CB-2162 on the standoffs of the CA-1000.
6.
Secure the NI CB-2162 in the bottom of the CA 1000 using two of the
screws provided in the NI CB-2162 CA-1000 Mounting Kit.
7.
Place the lower edge of the VHDCI panellete in the groove at the
bottom of the enclosure opening.
8.
Tilt the VHDCI panelette top back into the enclosure.
1
CA-1000 Enclosure
2
Top Cover
3
4-40 x 1/4 in. Screws
1
2
3
