NI Climbing Frames Triple 6 foot double climbing frame, Assembly Instructions Manual

Page: 8 / 17

pg. 8

Place the ‘o’-hooks supplied through the holes on the remaining 4”x4” post (square on both
ends) securing them using the appropriate spanner

Now the tricky part. The ‘A’-frame is designed to be at a 10 degree angle (i.e it is not at 90
degrees to the surface). This is best achieved by measuring 11 ft from the end of the
climbing frame to the base of the A-frame.

Put the A-frame up (the 11ft away from the frame) and place the 10ft swing arm post on top
of it

The A-frame should be then lined up to the centre of the tower

The holes on the ground should then be marked and the ‘v’-frame should be sunk into it’s
place so that the swing bar is level

To obtain the depth of the holes place a spirit level on the swing arm and measure how
much the A-frame has to be sunk into the ground.

Once this is achieved , then secure both ends into place