NI Climbing Frames Tractor and Trailer, Assembly Instructions Manual

Page: 7 / 19

pg. 7
Step 6: Side-rails assembly

There are 3 open (2 offset, for your rockwall and steps) and 1 closed rail. The open ones are
for the steps, rockwall and slide and the closed ones are for the front. They should fit tightly
into place between the upright posts and on the base. (If you have purchased a trailer, your
slide will be going onto the back of the trailer, and you will have two closed railings for the
back and front of the main tractor frame.)

The ‘double’ timbers on the side-rails should be on top and the single timber should be at
the bottom

Secure the bottom rail to the base using decking screws (screwing up from underneath the
base into the bottom of the railing)