NI Climbing Frames Double Climbing Frame, Assembly Instructions Manual

Page: 4 / 13

pg. 4

Now with the 200mm index screws provided, screw the poles together on both sides,
making sure the index screw is tightened into place

Make a mark 900mm from the bottom of both 10ft posts

Using the 1460mm 3”x1 1/12” timber and using the 50mm decking screws screw the timber
to the frame (this is to strengthen the H-frame structure, without this additional support at
the bottom the frame will twist once it is lifted up)

Repeat the above steps for the 2
nd
H-frame
Step 3: Base assembly (requires heavy lifting, please use at least 2 people)

Lift both ‘H’-frames into the holes that have been cut out in the ground

Make sure the tops of these ‘H’-frames have the correct angle pointing in (to ensure that the
roof will be able to rest on the tops)

To ensure that the base fits into place use the 1274mm 3x1 ½” timber provided to connect
the 2 ‘H’-frames together