background image

 

 

Troubleshooting

Problem

Solution

No LEDs and no Sound

No Sound, amber standby LED

No Sound, all LEDS green

Status LED is red

Make sure the power cable is plugged in and the power
switch on the real panel in in the ON position.

If the standby switch is showing an amber LED, press the
standby switch. It should change to green and you
should have sound.

Check to see if your source and preamp/surround
processor is setup properly.  Check that the speaker
wires are connected properly. Check that the input con-
nectors are connected properly. Try a different loud-
speaker.

Amplifier is running too hot, see if the amplifier place-
ment is blocking Power

5

’s air vents in any way. Check to

see if there is a shorted speaker wire.

Limited Warranty

Valid Only in the U.S.A. and Canada

Warranty Period

For a period of 3 years for parts and 3 years for labor from the date this product is first purchased from an authorized NHT dealer, Now Hear This (NHT) warrants that if it
fails to function properly due to a manufacturing defect, despite its being installed and operated according to these instructions and used under normal conditions, it will
be either replaced or repaired with new or rebuilt parts (both at NHT's option) with a unit of comparable value without charge to you.

What's Not Covered

Altered, defaced or removed serial numbers void this warranty.

This warranty does not cover any product used in trade, business, industrial or commercial applications.

This warranty also does not cover the cabinet or appearance factors, or costs, defects or damage resulting from misuse, abuse, accident, improper maintenance, alter-
ations or modifications not authorized in writing by NHT, or  parts or labor from any source other than an authorized NHT service location.

Damage due to power exposure in excess of the speaker's published power ratings; ie, overpowering, lightning or power surges, are also not covered.

Your Rights

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

NHT limits this warranty to the purchase price of the product, excludes incidental or consequential damages, and limits its obligations under any implied warranties under
state laws to a period not exceeding their warranty periods.  As  some states do not allow the above limitations, however, they may not apply to you.

To Obtain Service

To find the name and address of the nearest authorized NHT service location, call or write:

Customer Service Department, NHT, 6400 Goodyear Rd., Benicia, CA 94510, 1-800-NHT-9993 (648-9993), www.nhthifi.com

For your future convenience, please keep this warranty with your sales receipt, and record date and place of purchase for further reference

.

13

Summary of Contents for Power5














Reviews: