manualshive.com logo in svg

NGX Technologies BLUEBOARD-G12, Quick Start Manual, Page: 8 / 15

Share
Download
NGX Technologies BLUEBOARD-G12 Quick Start Manual Download Page 8

Quick Start Guide: BLUEBOARD-RL78/G12/G13/G14_30pin    

                                              

 

 

Page | 8 

 

3.0

 

BLUEBOARD-RL78/G12/G13/G14_30pin Hardware Description

  

3.1 Introduction  

  

The NGX BLUEBOARD-RL78/G12/G13/G14_30pin is based on RL78/G12/G13/G14_30pin   

microcontroller from RENESAS. RL78/G12 offers 16 KB, RL78/G13 offers 48KB, RL78/G14 offers 
64KB Flash memory, 32-MHz operation, ADC: Up to 8 channels, 10-bit resolution, 2.1µs conversion 
time, D/A converter: 2 channels, 8-bit resolution, On-chip temperature sensor and wide range of 
peripherals. Refer to the RL78/G12/G13/G14 data sheet for complete device details.  
  

BLUEBOARD-RL78/G12/G13/G14_30pin  microcontroller  is  factory-programmed  with  a  quick  start 

demo program. The quick start program resides in RL78/G12/G13/G14_30pin on-chip Flash memory and 
runs each time power is applied, unless the quick start has been replaced with a user program.  

  

 

3.2 Board Image with pointer to each peripheral & connectors  

 

 

 

 

 

 

 

 

Fig 4

 

 

 

 

 
 

Summary of Contents for BLUEBOARD-G12
















Reviews:

No comments