3
Programming the Features through Menu Mode
Touch the keypad to activate the lock.
Press the
0
and
#
keys to access the menu.
Verify the administrator’s identity with his/her fingerprint, or by entering the
password then pressing the
#
key to confirm.
Enter the digit corresponding to the function to be performed by following the
audio guide.
Note:
1)
The registered password must be
six digits
.
2)
If you try to register the same fingerprint/password again, the lock will prompt
"Already Used!".
3)
The currently logged-in administrator cannot delete his/her admin data.
4)
The Always Open Mode and Lockout Mode cannot be enabled at the same time.
In such a case, Lockout Mode will be prioritized over Always Open Mode.
4
2
3
1
