USER’S MANUAL
4
TROUBLESHOOTING
If you experience problems during the installation of your system
please first check the following conditions:
· Make sure all the connections between the system and devices are
fully seated.
· Make sure that the power supply is switched on.
· If connected to a non-standard game console or audio device,
please consult the manual of those devices for connection.
PRECAUTIONS
1. Your system should be situated away from heat sources such as
radiators and heaters.
2. Do not place your system on an unstable table, stand, tripod or
bracket.
3. Keep your system dry and avoid contact with damp or wet areas.
4. Read the instructions manual carefully before the installation of
your system.
5. Keep this instruction manual for future reference.
6. Follow all the instructions in this manual to operate your system.
OPERATION AND CONNECTION
Please make sure the system and the devices are power off before
establish any connection.
Please refer to the above figure for cable connection
Step l: Connect the device (PC/CD/MP3) with the Stereo Input Cable
on the back panel.
Step 2: Connect the two satellite speakers to the speaker output
section on the back panel.
Step 3: Connect the power cable and press the power button.
Step 4: Setup your favorite volume level.
IMPORTANT
Please unplug the system if any of the following conditions exist:
· The power cord or plug becomes frayed or otherwise damaged.
· Your system has been dropped or the enclosures have been
otherwise damaged.
· Liquid has been spilt into a speaker enclosure.
· You suspect that your system needs repairing.
· Your system is exposed to rain or any other excessive moisture.
