NF WF1943B, Instruction Manual

Page: 74 / 156

4.2 Sweep
4-26
WF1943B
(2) Set sweep TYPE to FREQ
①
Use the and keys to produce the following display (TYPE flashes).
ＦＲＥＱ ＰＨＡＳＥ
Ｆ－ＳＷＰ：ＴＹＰＥ ＳＯＵＲＣＥ ＭＯＤＥ
4
②
Press the
ENTER
key, then use the and keys to produce the following display (FREQ
flashes).
ＦＲＥＱ ＰＨＡＳＥ
Ｆ－ＳＷＰ：ＴＹＰＥ ＳＯＵＲＣＥ ＭＯＤＥ
4
③
This completes setting the sweep type to frequency. Press the
EXIT
key once to release the
setting mode.
(3) Select the sweep FUNCTION
①
Use the and keys to produce the following display (FUNCTION flashes).
ＬＩＮ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
②
Press the
ENTER
key.
③ Press the key, then select with the
MODIFY
dial
④ After selecting, press the
EXIT
key once to release the function select mode.