4.
Output distorted at medium volume setting.
Amplifier is running too hot, ensure free airflow into and out of the unit. (See section a. Placing the power
amplifier).
5.
Trip indicator is lit and no sound is heard.
See section on trip indicator or the Amplifier has overheated.
Ensure free airflow into and out of the unit. The amplifier will reset when cool.
Or the amplifier has developed an internal fault, please consult your dealer.
PLEASE DO NOT
SWITCH or LINK + & - TERMINALS -
IF IN DOUBT PLEASE CALL HELP LINE
PLEASE REMEMBER YOUR SYSTEM IS
ONLY AS GOOD AS ITS WEAKEST POINT
THIS IS GENERALLY
THE HOOK UP WIRES
NEARLY ALL SOUND SYSTEM
FAULTS CAN BE TRACED BACK
TO POOR WIRING CHECK
ALL CABLES REGULARLY
HELPLINE (UK) 44 1749840102
TECHNICAL SPECIFICATION
POWER OUTPUT NEXUS 2.0
Load Per Channel
<0.1% <5% PEAK
16ohm 415
478 730
8ohm 733
800 1266
4ohm 1000
1108 1657
TEST PERAMETERS
Powers in watts r.m.s per channel using 1 kHz tone. The peak powers are short term maximum peak powers.
All other power measurements are continuous tone.
TECHNICIANS PLEASE NOTE due to the nature of this amplifiers SMPS power supply it is not advised to test
with continuos tone into a non inductive load for more than 5 minutes, also the power registered on this
type of test will not include the high sided drive output.
FREQUENCY RESPONSE: 3.5 Hz - 30kHz + O
d
b - 3
d
b
INPUT SENSITIVITY: 0
d
Bm 0.775v RMS or
+
4
d
Bm 1.
DAMPING FACTOR > 175
@
100Hz
DISTORTION: 0.05%
@
1Khz
INPUT IMPEDANCE: 20Kohms balanced or 10K ohms unbalanced
NOISE LEVEL: -95
d
Bm
PROTECTION: Individual channel protection disconnects speakers
when 800mV, DC is present on output. short circuit & over current shut down
THERMAL: Automatic shutdown
@
100 deg C ( Auto reset)
COOLING:
2 Fan 80mm
²
MAINS AC FUSES: 15A 32mm
SIZE: 483 X 90 X 390.
WEIGHT: = 8.5 Kg ( 18.7lbs. )
MAINS SUPPLY: 230V A.C. 50/60 Hz