Unite U74 Audio Amplifier User Guide
Unite_U74_UG_01_120421.docx
Page 5 of 19
Power-up
Check connections and move the power switch to the ON
(I)
position.
The front panel power LED will flash while the amplifier boots up, acquires and IP
address and loads its last-set configuration.
When this process has completed the power LED will remain ON steady and the Display
will light up and indicate the current Zone Source and volume settings.
Web Interface
The U74 amplifier can be configured and controlled via its web interface.
There are 2 levels of access: User and Manager. Manager access is required for
Configuration and Control while User only allows Zone volume control.
Login
Record the IP address of the amplifier as shown on the front panel display.
Option1:
Enter the following address into your Web browser (most browsers):
http://unite.local
Option2:
If the browser does not connect using option1 method then enter the IP
address into your Web browser in the following format:
http://aaa.bbb.ccc.ddd
Where aaa.bbb.ccc.ddd is the address noted from the front panel display.
Option1 or Option2 will take you to the login page of the amplifier.
Mono Mic or
Line Inputs 1
and 2
Stereo Line
Inputs 3 to 5
Digital
Input 6
Speaker
Outputs
1 to 4
Mute and
PTT inputs
1 and 2
USB
Input
LAN
