8
Step 5:
Press and hold the Down button on the
Wired Backup Switch
and
run the Actuators to their lowest position.
Step 6:
Once the Actuators stop, release the Down button then press and
hold it again until you hear a click from both Actuators. This will initialize
them so they start and stop at the same point.
UP
DOWN
Step 4:
Connect the
Power Cable
to Port AC on
the
Control Box
and connect the other end to a
Wall Outlet.
Step 3:
If the system came with RF Controls, connect the
Wired Backup Switch
and
RF Receiver
to Ports A1
& A2 on the
Control Box
.
If your system came with the CSI Kit, connect just the
IR Receiver
to Port A1 on the
Control Box
.
CSI Kit
RF Kit
Summary of Contents for Transcend Pro
Page 1: ...Transcend Pro Installation Instructions...
Page 2: ...1...
Page 24: ...23...
Page 25: ...24 866 500 5438...
