14
The following Diagrams show information on how to attach the Vertical Mounting Bars to the TV in 2 Scenarios.
All hardware mentioned in these diagrams is inside the Large Assorted TV Hardware Pack, however other hardware may be
necessary based on TV model. Refer to the TV Manual for screw sizing information.
Step 20:
Attach the Vertical Mounting Bars to the back of the TV using the provided Large Assorted TV
Hardware.
Irregular/Obstructed Back
Flat/Unobstructed Back
A
B
Diagram
“A”
installation procedure:
1) Place the flat screen TV face down on a
protected surface.
2) Position the Vertical Mounting Bars
equidistant from the bottom and top of
the TV, with the slots facing toward
the top of the TV.
3) Using the four (4) Square Multi-Mount
washers and the TV mounting screws selected
from the bag, attach and tighten the hardware.
DO NOT OVERTIGTHEN HARDWARE. DAMAGE TO TV MAY RESULT.
Diagram
“B”
installation procedure:
1) Place the flat screen TV face down on a protected surface.
2) Position the Vertical Mounting Bars equidistant from
the bottom and top of the TV, with the slots facing
toward the top of the TV.
3) Using the four (4) spacers needed,
(4) Square Multi-Mount washers and the
TV mounting screws selected from the bag,
attach and tighten the hardware.
The hardware will be used in this order
(as shown in the diagram above):
TV, Spacers, Vertical Mounting Bars, Square Multi-Mount Washers, TV Mounting Screws.
DO NOT OVERTIGTHEN HARDWARE. DAMAGE TO TV MAY RESULT.
