3
Parts List, continued
Cables
Motor Cable 2.5m (1)
– Black cable with white, six-pin plugs. Use this cable to connect the Lift Column to the Control Box.
Power Cable
– Connects Control Box to power outlet. Three feet long.
RF Cable (only present if you ordered the RF version of the Lift System)
– Use to connect the RF Receiver to the Control
Box. Ends have RJ-45 connectors. One-foot long.
Hardware
1.
Eight (8) -- 6 x 12mm BHMS (Button Head Machine Screw)
2.
Four (4) -- 6 x 16 BHMS (Button Head Machine Screw)
3.
Four (4) -- 3/8” – 16 x 3/4” BHMS (Button Head Machine Screw)
4.
Four (4) – 6 x 12mm FHMS (Flat Head Machine Screw)
5.
Four (4) – 6 x 16mm FHMS (Flat Head Machine Screw)
6.
Four (4) -- #8 x ¾” FHWS (Flat Head Wood Screw)
7.
Two (2) -- #10 x 1-¾” FHWS (Flat Head Wood Screw)
8.
Eighteen (18) -- #10 x ¾” THWS (Truss Head Wood Screw)
9.
One (1) – Small Hex Key (4mm)
10.
One (1) – Large Hex Key (7/32”)
11.
Four (4) – Universal Lid Catches
12.
One (1) – Large Assorted TV Hardware Pack
13.
Two (2) – Threaded Tapered Pins
14.
Four (4) – Wire Clips
15.
Four (4) – Snakeskin Ties
16.
Four (4) – Plastic Wire Ties
Wire Management
The Lift System has no exposed gears or moving parts that can damage your
wires, so wire management is simple. We have included a four-foot long
“SNAKESKIN” sleeve, which is a state-of-the-art wire bundling and protection
system (the sleeve can be cut shorter if you wish). The System also includes 4
Velcro end ties and 4 plastic ties. Use the Velcro ties at the ends of the
SNAKESKIN, to close the ends of the sleeve and to keep the wires together inside
it. Use the plastic ties to fasten the cable bundle in a fixed position, so it moves
up and down with the lift.
Control Box
Assorted TV Mounting Screws
