12
Assembling and Installing TV Mounting System
For these steps you will need the following parts:
Screen Support
(2) Top Support Brackets
Top Plate
Screen Back Plate
(2) Vertical Mounting Bars
Screen Locks
(4) 3/8”-16 x ¾” BHMS
(8) 6 x 12mm BHMS
(4) 6 x 16mm BHMS
(4) 6 x 12mm FHMS
(2) Wire Clips
Step 13-2:
Attach the Screen Support to the top of the Lift
Column using (4) 6 x 16mm BHMS. Ensure you use the four
mounting locations that DO NOT have dot marks.
Step 14:
Measure the Interior Height of the Cabinet and subtract
28.125” from it. This will be the distance you will need to attach
the Top Support Brackets above the Screen Support.
Step 15:
Attach both Top Support Brackets to the sides of the
Screen Support using (8) 6 x 12mm BHMS, (4) per side.
Step 13-1:
Place (2) Wire Clips on the Interior of the
Screen Support in the two locations shown in the
photo to the right then push the Motor Cable into
the both Wire Clips.
