Nexus 21 L-45en, Installation Instructions Manual

Page: 4 / 32

4
Parts List, continued
10.
Control Box 11. Side Panel Bracket (2) 12. Accessory Mounting Bracket (2)
(10 ½” x 3 ¾” x 1 ½”) (14” x 1 ¾”) (2 ¼” x 11 ½”)
13.
Rear Panel Bracket 14. Top Support Bracket (2) 15. Bottom Panel Bracket
(6 ¾” x 2” x 3 ½”) (14” x 2 ¾” x 1 1/8”) (20” x 5” x 3 ¼”)
Cables

Motor Cable – Black cable with white, six-pin plugs. Use this cable to connect the Lift Column to the Control Box
(using slot #1 on the Control Box). Three feet long.

Power Cable – Connects Control Box to power outlet. Three feet long.

RF Cable (only present if you ordered the RF version of the Lift System) – Use to connect the RF Receiver to the
Control Box. Ends have telephone-style connectors. One foot long.
Hardware
16
.
Two (2) -- Screen Locks
(In bag labeled PDM-0108 - Located in box with Part #6 and #9)
17. Four (4) -- 6mm x 16mm Button Head Machine Screw
18. Four (4) – 6mm x 16mm Flat Head Machine Screw
19. Thirty-Two (32) -- 6mm x 10mm Button Head Machine Screw
20. Two (2) -- 1½” x ¼” Steel Threaded Taper Pins (For Floating Top)
21. Twelve (12) -- 3/8 - 16 x ¾” Button Head Machine Screw
22. Eight (8) – 3/8 Nyloc Hex Nuts
23. Two (2) -- #10 x 1 ¾” Flat Head Wood Screw
24. Forty-Six (46) -- #10 x ¾” Truss Head Wood Screw
25. Four (4) -- #8 x ¾” Flat Head Wood Screw
26. RF Controls or IR Controls (see explanation on page 6)
27. Two (2) -- Allen Wrenches – 4mm and 7/32”
28. Four (4) -- Square Multi Mount Washers
29. Four (4) -- Lid Catch Brackets w/ (8) #10 x ¾” THWS
30. One (1) -- Bag of Assorted TV Mounting Screws
Wire Management
31. One (1) -- “Snakeskin” Wire Management Sleeve – 4 feet long
32. Four (4) -- Velcro end Ties, for use with Wire Management Snakeskin
33. Four (4) -- Plastic Ties, also for use with Wire Management Snakeskin
34. Four (4) – Wire Clips