Nexus 21 L-23S, Installation Instructions Manual

Page: 9 / 24

9
Step 4: Attached the Bayonet bracket to the Lift Column. Slip the Bayonet Bracket into the welded
sleeves located on the side of the Lift Column. Make sure the position the Bayonet Bracket on the
opposite side of the pigtail cable. Level the Bayonet Bracket, as this will ensure the lift column is
square and level once placed inside
the cabinet.
Step 5: Attaching the Swivel Mechanism to the Lift Column:
Align the four screws on the bottom of the swivel mechanism
with the four holes on the top of the lift column. Once
aligned, place the provided allen wrench into the four non-
threaded holes to tighten all four screws.
BE SURE THE
PIGTAIL ON THE TOP OF THE LIFT COLUMN IS PROPERLY
SEATED (FACING FORWARD) IN THE SQUARE CHANNEL (SEE
STEP #2) USING THE RUBBER GASKET ATTACHED TO THE
CABLE.