NPS2400
User’s Manual
Rev. 3.0
– 17.02.2015
Page 33/38
6.6.15
Vin Under Voltage alarm end
Code, Type, Minimum value:
Time stamp:
Event
: Vin Under Voltage alarm condition ends. Minimum value is the lowest Vin measured during the alarm
6.6.16
Vin Over Voltage alarm start
Code, Type, Offending value:
Time stamp:
Event
:
Vin > VinMaxAlarm
6.6.17
Vin Over Voltage alarm end
Code, Type, Maximum value:
Time stamp:
Event
: Vin Over Voltage alarm condition ends. Maximum value is the highest Vin measured during the alarm
6.6.18
Phase Loss alarm start
Code, Type:
Time stamp:
Event:
A mains
phase is missing for > 10s
. In case of a phase loss alarm the maximum output power is reduced an half.
6.6.19
Phase Loss alarm end
Code, Type:
Time stamp:
Event:
Phase Loss alarm condition ends.
6.6.20
Maintenance Due alarm start
Code, Type:
Time stamp:
Event:
Maintenance is due.
6.6.21
Maintenance Due alarm end
Code, Type:
Time stamp:
Event:
Maintenance done
6.6.22
Remote Shutdown event start
Code, Type:
Time stamp:
Event:
The device has been
remotely shut down
through the remote shutdown input.
IOVS(AL) 545V
ddmmyy hh:mm:ss
Ph Loss St. (AL)
ddmmyy hh:mm:ss
IUVE(AL) 310V
ddmmyy hh:mm:ss
IOVE(AL) 547V
ddmmyy hh:mm:ss
Ph Loss End (AL)
ddmmyy hh:mm:ss
Maint. Due (AL)
ddmmyy hh:mm:ss
Maint. OK (AL)
ddmmyy hh:mm:ss
Rem.Sh. St. (EV)
ddmmyy hh:mm:ss
