NPS2400
User’s Manual
Rev. 3.0
– 17.02.2015
Page 27/38
6.4.12
Operating mode
Setting:
Value:
Use the UP/DOWN key to select the desired operating mode between OVERBOOST / CURRENT LIMIT / BATTERY
CHARGER (battery
charger only available on the “-24” and “-48” models).
Default
:
OVERBOOST
6.4.13
Battery type
Setting:
Value:
This submenu is present only if operating mode is set to BATTERY CHARGER. Use the UP/DOWN key to select the nominal
battery type. Possible choices are
“Lead acid” and “Nickel”.
Default
:
Lead acid
6.4.14
Battery nominal voltage (only for lead acid
on “-24” and “-48” models)
Setting:
Value:
This submenu is present only if operating mode is set to BATTERY CHARGER. Use the UP/DOWN key to select the nominal
battery voltage of lead acid batteries
. Possible choices are 12V or 24V for “-24” model and 48V for “-48” model.
Default
:
12V / 48V
(model dependent)
6.4.15
Battery charge voltage
(only for nickel on “-24” and “-48” models)
Setting:
Value:
This submenu is present only if operating mode is set to BATTERY CHARGER. Use the UP/DOWN key to select the battery
charge voltage for NiCd/NiMH batteries. Range is 12.8V to 29V
for “-24” model and 25.6V to 56V for “-48” model.
Default
:
12.8V / 25.6V
(model dependent)
6.4.16
Battery capacity (
only on “-24” and “-48” models)
Setting:
Value:
This submenu is present only if operating mode is set to BATTERY CHARGER. Use the UP/DOWN keys to select the nominal
battery capacity
. Range is 50Ah to 1000Ah for “-24” model and 25Ah to 500Ah for “-48” model.
Default
:
50Ah / 25Ah
(model dependent)
6.4.17
Battery charge mode
(only on “-24” and “-48” models)
Setting:
Value:
This submenu is present only if operating mode is set to BATTERY CHARGER. Use the UP/DOWN keys to select the desired
battery charging mode between NORMAL (0.1C) or FAST (0.2C).
Default
:
NORMAL
Bat. ch. mode:
NORMAL
Operating mode:
OVERBOOST
Bat. nom. volt.:
12V
Bat. capacity:
50Ah
Bat. ch. volt.:
12.8V
Bat. type:
Lead acid
