NextWave Digital TDR-3200, Operating Instructions Manual

Page: 4 / 40

4
Connect your antenna to the ANT IN socket.
Connect Video and Audio lead between STB and VCR or TV.
- Connect video (yellow) plugs of supplied lead to VIDEO
OUT of STB to
VIDEO IN of your TV or VCR.
- Connect audio (white & red) plugs into the AUDIO L-R
sockets on the STB and to AUDIO IN
(L-R) of the VCR or TV.
For other connection options see pages 10-15 or visit www.nextwave-digital.com
Turn on STB.
- Power up STB at mains switch behind the decoder.
- Press STANDBY button on Remote Control Unit (RCU)
or the front panel button.
- NoPr will appear on the 4-digit front panel display. t0(xx)
will appear on the front panel display if the STB has
previously been scanned.
At Start-up, highlight (green) QUICK SCAN using
buttons. Press OK.
The STB will have no channels activated when first installed.
Press OK on AUTO SCAN and this will activate the scanning
process. The scan process should take a minute.
Step.
2
Step.
1
Step.
4
Step.
3
Quick-Start Guide
If you wish to operate the NextWave Australian Digital TV ‘Set Top Box’ (STB) before
reading the rest of this manual, use the following steps to get started quickly.