2218202
Features
Your LCD Digital talking Multimeter is a portable, compact multimeter that is ideal for field, shop,
and home applications.This Multimeter can display up to 4, 000 units. It measures AC voltage up
to 750 V, DC voltage up to 1000 V, and resistance up to 40 M.
Rubber Case
— Protects the meter.
Low Battery Indicator
— So you can quickly see when you need to replace the battery.
Diode Check Function
— Lets you safely check semiconductors for open, shorted, or normal
junctions.
Full Auto Polarity Operation
— Protects your meter and gives valid measurements even when
you connect the leads in reverse polarity.
Latest IC and Display Technology
— Ensures reliability, accuracy, stability, and ease of
operation.
cUL Listed
— Passes the stringent safety tests required by Canadian Underwriters Laboratories.
Note
: Your meter requires three AA batteries (not included) which you must install before using.
Important :
• This meter is not designed for commercial, industrial, or outdoor use.
• Completely read this manual before you use the meter.
• If you are not familiar with multimeters and testing procedures, we suggest you read Using
Your Meter before using the meter.
Warnings :
• Use extreme caution in use of this device. Improper use of this device can result in injury or
death. Follow all safeguards suggested in this user’s manual. In addition to normal safety
precautions in dealing with electrical circuits. Do not use this device if you are unfamiliar with
electrical circuits and testing procedures. Not for commercial or industrial use.
• If this equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
• To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
A Word About Safety
We have taken every precaution in designing this meter to ensure that it is as safe as we can
make it. But safe operation depends on you, the operator. We recommend that you follow these
simple safety rules.
• Never apply voltages to the meter that exceed the limits given in the specifications. Never
apply more than 500V DC or 500V RMS AC between the test leads and ground.
• Use extreme caution when working with voltages above 100V. Always disconnect power from
the circuit you are measuring before you connect test leads to high-voltage points.
• Never connect to a source of voltage when you select the diode check resistance
measurement function.
• Always discharge any capacitors of the circuit under test before you attach test leads.
• Always turn off power and disconnect the test leads from the circuit you are testing before you
replace the meter’s battery.
• Never operate the meter unless its battery compartment cover is fully closed with the screw
fully tightened.
• This equipment is rated for installation category III.
• Because many AC/DC sets have a potentially hot chassis, be sure the top of your workbench
and the floor underneath it are made of non-conductive materials.
• This meter is fully calibrated and tested. Under normal use, no further adjustment should be
necessary.
Page 2
Digital Multimeter With Voice Readout