13
USING THE VEHICLE
Place the electric scooter on a flat surface. Press the power button. Check the battery charge level. Do not
jump on the vehicle. Firmly grasp both handles, push forward with one foot firmly on the ground, after
placing the other on the front of the footboard parallel to it. Never place your front foot on the back of the
footboard. Once in a balanced position, press the acceleration lever, after making sure that there are no
obstacles or dangers nearby. Keep a safe distance from any other users or anyone around you. Start with
small forward movements. When you feel confident and balanced, prepare to change direction by slowly
turning the handlebar. Avoid abrupt and sudden movements. Do not spin for an extended time, it may
cause dizziness or falls.
Do not use cellphones or other devices that may distract you while driving. Release the accelerator lever
to slow down; use the brake lever located on the left side of the handlebar to brake. Make sure the vehicle
is completely stopped before getting off.
CLOSING SYSTEM
Make sure the electric scooter is switched off. Lift the stop located on the left side of the locking/unlocking
lever. Pull the lever towards you to free the control rod. Bend the rod towards the back of the electric
scooter until the slot of the spring hook placed on the handlebar, to the right of the bell, fits into the
corresponding locking block on the upper part of the rear mudguard.
Hold the control rod with one or both hands to transport the electric scooter.
OPENING SYSTEM
Press the spring hook located to the right of the bell to free the handlebar and raise the control rod to an
upright position. Lock the control rod by pressing the closing locking/unlocking lever against the rod until
you hear a click.
stop
Summary of Contents for TOURER 8.5
Page 10: ...10 Information Settings ...
