Nextreme Skylon 6.5, User Manual

Page: 4 / 10

4
TECHNICAL DATA
SWITCHING ON AND OFF
Place the hoverboard on a flat surface. The ON/OFF button is on the hoverboard lower part. To switch the
hoverboard on keep the ON/OFF button pressed for some seconds. The LED lights will light up. To switch
the hoverboard off keep the ON/OFF button pressed for some seconds. The LED lights will be switched off.
• CONTROL SENSORS
This hoverboard has 4 sensors under the platforms.
When you climb onto them the hoverboard balances au-
tomatically. To use it you need to ensure that you are tou-
ching both the platforms. Be careful not to place your foot
on the external part of the platforms, since the hoverbo-
ards may not realize you are there.
Do not lean forwards or backwards excessively and
do not drive on a slope. Do not lean objects on the
pedals, this behaviour could increase the possibility of
falls or damage to the vehicle.
Do not put your weight in the central part of the hover-
board; this is where the mechanical steering mechanism is housed. An excessive weight could result in it
breaking or not functioning correctly.
• CONTROL LIGHTS
The control indicators are in the centre of your hoverboard
1. THE BATTERY CONTROL LIGHT.
Green: the battery is fully charged.
Yellow: the battery has a charge of about 20%.
Wheel diameter 16,5 cm (6.5")
Engine power 350Wx 2
Maximum speed up to 15 km/h
Maximum climbing capacity up to 25°
Battery 4.400 mAh Lithium-Ion Samsung
Travel distance up to 20 km
Charging time about 3 hours
Safety lights LED
EU approved battery charger CE, EMC, IEC 61000. - Overload protection and red/green LED charge indicator
Recommended maximum user’s weight 100kg
Includes Bluetooth and integrated speaker, backpack for easy carrying
Certifications CE EN ISO12100, ROHS, LVD, EMC
BATTERY INDICATOR
ON/MOVEMENT INDICATOR
2
1