19
6
On the OSU device, loop the grounding wire around the bottom
bolt that holds the OSU to the bracket.
7
Connect the other end of the grounding wire to the grounding
rod in the ground next to the house.
7
P
LUGGING
IN
POWER
CORD
AND
RJ-45
CORD
1
The power cord uses standard household power. Plug the power
cord in the power source.
2
Plug the RJ-45 cord into the NIC on your computer or switching
device.
8
F
INDING
THE
STRONGEST
SERVICE
PROVIDER
SIGNAL
Your OSU is equipped with an internal antenna. To provide the best
service, the OSU searches for the strongest signal transmitted by your
service provider.
You can find the strongest signal from your service provider by using
one of the following methods:
•
Software-assisted method
•
Sound (auditory) method
Both methods require you to install the LinkMonitor program
Installing the LinkMonitor program
1
Locate the software CD supplied with your OSU.
2
Insert the CD into your computer’s CD drive. If the installation
program does not start automatically, start it by clicking on the
Setup.exe icon.
Follow the instructions in the dialog boxes to complete the
installation of the LinkMonitor program.
3
After the software is installed, a blue RSU icon appears in your
computer’s system tray.
