NEXTIVITY CEL-FI RS2 Quick Start Manual Download

Page: 2 / 4

Step 1

Find the spot with the best 3G coverage:

The first step in setting up your Cel-Fi system is to find the spot

in your home or office that has the best 3G coverage. This is

typically by a window, and if you are in a multi story building,

upstairs windows are usually better than downstairs windows.

Step 2

Plug in the Window Unit:

Take the Window Unit and one power supply out of the box

(both power supplies are the same, so grab either one). Plug the

Window Unit in, and check to make sure that you can see at least

1 “Bar” on the display in the center of the device. If you do not

see at least 1 bar, try a different location.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Summary of Contents for CEL-FI RS2

Page 1: ...uc tions in this guide you can optimize the installation and get the very most from your new Cel Fi System If you have any trouble during setup please use the trouble shooting steps included in this g...

Page 2: ...windows are usually better than downstairs windows Step 2 Plug in the Window Unit Take the Window Unit and one power supply out of the box both power supplies are the same so grab either one Plug the...

Page 3: ...icates that the Coverage Unit needs to be moved closer to the Window Unit Step 3 Optimize The Window Unit Placement The number of bars you can see on the Window Unit make a significant difference in t...

Page 4: ...age Unit is overheating Try This Try moving the Window Unit to another room or area where you have cover age Use your cell phone to find the best 3G coverage Try moving the Window Unit to another room...