3
6. Attach the lens cover.
7. Screw the cover to the camera body.
Restoring Factory Default Settings
The IP camera comes with the following factory default values:
●
IP Address: DHCP enabled
If the DHCP configuration fails, the IP camera assigns itselfs a temporary APIPA address: 169.254.X.Y.
(where X and Y are based on the last two octets of the MAC Address.
●
Username and Password: admin
From a web browser
From the rear of the device
1. Type the IP address of the Nextiva IP camera in the Address bar, and
then press ENTER.
2. Type the username and password.
3. Click
Configuration > System > Maintenance
.
4. From the
Set to Factory Default
section, choose one of the
following:
■
Return all camera settings to factory default except network
■
Return all camera settings to factory default.
5. Click
Default
.
●
Press and hold DEFAULT for
five seconds to return to
factory default.