Ensure adequate ventilation and do not cover the mains adaptor (not supplied) to avoid overheating.
Do not place any open ignition sources, such as lit candles onto or close to the device.
Do not subject
the LCD monitor to impact or pressure.
This could damage the glass of the monitor or
the liquid could leak from the inside. In case of contact with eyes or skin, rinse immediately with clear
water. In case of contact with eyes contact a doctor immediately.
Damage
to the electronics, the monitor or the lens caused
by external influences
such as impacts,
falls or other are not covered by the warranty and must be paid for.
Do not drop or bump the camera
and always handle it carefully. Otherwise the camera can be
damaged.
Do not wrap up camera or place on textiles.
This could produce a build up of heat in the camera
that can cause deformation of the housing and may represent a fire hazard.
Injuries and material damage
Only place the camera on sturdy surfaces.
The camera could otherwise fall or topple over, causing
damage or injury.
Do not operate the camera whilst running or driving.
You could fall or cause a traffic accident.
Only use a mains adaptor
(not supplied)
for the camera, having the input voltage specified on
the rating plate (6V).
We do not accept any liability for damage caused by the use of an incorrect
mains adaptor.
The 230V socket
used for the mains adaptor
(not supplied) must not be covered and accessible at all
times so that the mains adaptor can be quickly disconnected from the mains, when required.
5