Page 5 of 10
General cautions
-
Read this manual before use.
-
This machine should be used by professionals only.
-
The built-in safety mechanism should not be re-
moved or modified.
-
Do not allow unauthorized persons to repair the
machine.
-
Do not use this machine for any other kind of mate-
rial than NextDent
TM
3D printing Materials.
Package content
-
NextDent
TM
LC-3DPrint Box
AC Power cable (250V,10/16A)
6 pcs of UV18W lamps-71 colour
6 pcs of UV18W lamps-78 colour
Metal plate with glass insert
Instruction for use
Electric diagram
Declaration of conformity
Warranty conditions
-
-
-
-
-
-
-
-
Transportation / preparing the
site of machine
-
For units weighing more than 18kg (units weight:
22kg), transportation unit like a pallet truck is
needed and at least two persons are needed for
transportation and installation.
The surface should be flat and free of dust.
Make sure there is enough space on all sides.
Make sure that there is enough space between fan
and wall.
This unit is for indoor use only.
-
-
-
-
Environmental conditions
-
Temperature and Humidity: 5~40°C / 80%
Indoor use only
-
Steps for installation
-
Please read instructions for use .
Specifically read general caution including safety
information.
Connect all the lamps (12pcs) to all lamp sockets
which are placed in the cover and the chamber.
The recommended position of the supplied lamps
(6pcs of 18W lamps-71color and 6pcs of 18W
lamps-78color) is as shown in picture on the right.
Please make sure of rated voltage and power sup-
ply (110-240V 50/60Hz). Only the supplied power
cable can be used.
Connect the power cable with connector plug to
the power socket.
-
-
-
-
-
Safety warning label and symbol
information & Safety information
-
-
-
-
-
Do not touch live electric parts.
Turn off power source and disconnect
power cable before installing or servicing
the machine.
Turn off the machine when not in use.
Do not use worn and damaged cables.
Use only well maintained equipment.
- Keep away from children.
- Always turn off the machine before cleaning.
- Do not open the cover when machine is in use.
- Do not cover the fan at the back.
- Only use the machine with Figure 4
TM
, Fab-
Pro
TM
, and NextDent
TM
3D printing materials.
-
-
-
-
-
-
-
-
-
-
Wear UV protective glasses.
Do not touch the cover during operation,
this cover warms up.
Wear protective gloves.
The longest program is for 30 min. the
temperature inside the working chamber
can go up to 80°C.
Protective earth.
Wear UV protective glasses.
Caution! UV light hazard. Avoid eye and
skin exposure. Wear proper eye and skin
protection.
Wear protective gloves.
Be aware of the potential dangers of lifting
heavy loads. Ignoring this can lead to
injuries.
This device may only be lifted and moved
to its final destination for installation by
two people.
Summary of Contents for LC-3DPRINT BOX
Page 2: ...Page 2 of 10...
Page 9: ...Page 9 of 10...
