background image

CDPD0601PB003

CONFIDENTIAL AND PROPRIETARY INFORMATION

Do not duplicate or distribute without express permission from Nextcell, Inc.

11

0.5 VDC, then the charger will consider the battery to be defective
and will not attempt to charge the battery.

b.

If the battery is between 0.5 VDC and 2.5 VDC, the charger will
drop to trickle charge mode and attempt to bring the battery up to a
useable voltage without inducing any cell damage.

c.

When the charger gets above 2.5 VDC but is below 4.0 VDC the
charger enters a "bulk charge" state. During this phase of the
charge cycle, the charger will output a constant current of 0.45 A
until the battery voltage reaches 4.0 VDC.

d.

When the battery voltage reaches 4.0VDC, a top-off charge timer
starts. This timer will run for approximately 1.5 hours.

e.

When the top-off timer expires, the  Red LCD will turn off and the
Green LCD will illuminate, indicating that the battery may be
removed.

NOTE

If the battery is removed prior to the completion of the
charge cycle, or if power is lost during the charge cycle, then
unplug the charger and then plug it back in to reset the
charger.

If power to the charger is lost and reapplied prior to completion of charging,

 

the green

light will illuminate indicating the charger is ready for a new cycle.  In such instances,
remove and reinsert the battery into the charger to initiate a new charge cycle.

6.0 TECHNICAL SUPPORT

For problems stemming from your network access, contact your CDPD carrier service.

For technical support and customer service dealing with the modem itself, contact
Nextcell by any of the following methods:

Web site:

www.nextcell.com

Phone:

972-578-CDPD

972-578-2373

Email:

[email protected]

Before you contact Technical Support, please have your modem’s Equipment Identifier
(

EID

) number ready for the Technical Support representative.  If you did not record the

EID number, you can find this number in the 

PocketSpider Modem

 window, shown

previously in Section 3.3.

Summary of Contents for PocketSpider



















Reviews: