10
1. Place the dedicated keyboard on an even and stable plane (e.g. desk);
2. Hold your tablet with two hands, align the connector and the two magnetic
contacts on the keyboard to the jack and positioning slots at the bottom of the
tablet.
3. As soon as the keyboard is connected to the tablet, it is ready for use.
4. You can rotate the tablet to overlap the keyboard as you do with a laptop.
Note:
1.This keyboard is a plug-and-play device; you can connect/disconnect it anytime.
2. There is no notification or indication for the keyboard connection, except for
appearance of the mouse icon (arrow) as you put your hand onto the touch area.
3. When the tablet overlaps on the keyboard, the display will be turned off; as soon as
it is erect, the display will be turned on again.
4. Since the keyboard is powered by the tablet, it has no built-in battery inside.
Warning:
The maximum angle between the tablet and the keyboard is 120 degrees, so DO NOT
rotate the tablet greater than that angle; otherwise, it may cause damage to the tablet
and the keyboard.
To remove the keyboard from tablet, separate them gently.
Accessing Internet
You can access to the Internet easily with Wi-Fi networks.
Make WI-FI Connection
a.
Tap the Setting icon
on the apps screen
to open the settings menu.
b. Select “WIFI” and slide the toggle switch to
“ON” to turn on WIFI.
c. Tap “Wi-Fi” to select a router, the device
will scan automatically for available WiFi
networks in your range and display them on a
list.
d. Choose a network from the list and then tap “Connect” to connect. Some network
may be secured with password, so you will have to enter the password before
connecting. If the connection is successful, the message ‘Connected to…(WiFi
Network Name)’ will appear under the WIFI Setting.
Managing 3rd Party Applications
Your device provides support to many useful third-party applications. You can
purchase or download some applications from an app store or market to add more
functions to your device.
.
Install Applications
You can install applications manually as below:
