DASH CAM SETTINGS (CONTD.)
DASH CAM SETTINGS (CONTD.)
Setup menu continued:
2. Sync Time & Date
This function can be used to synchronise the time and date on the Dash Cam to that of your
connected device.
3. Set Time
This setting allows you to set the Time manually, if required during initial setup.
4. Set Date
This setting allows you to set the Date manually, if required during initial setup.
5. Sounds
Turn Off / On the device sounds, these will cancel the notification Sounds and the Startup &
Shutdown chimes.
Options: On and Off
Default Setting: On
6. Announcements
Turn Off / On the spoken announcements, these are heard when there is no SD card inserted
or the SD card has an error and needs to be formatted using the Dash Cam.
Options: On and Off
Default Setting: On
7. Language
Select preferred language for the spoken announcements.
Options: English, Danish, German, Spanish, French, Italian, Dutch, Norwegian, Finnish
and Swedish
Default Setting: English
8. Enable Wi-Fi on startup
Once enabled the Dash Cam's Wi-Fi will turn on automatically when the Dash Cam starts up.
The Dash Cam’s Wi-Fi will be seen as an Access Point (hotspot) by your mobile device,
depending on the settings within your device it may automatically connect to the Dash Cam.
This may leave you without a cellular connection.
Options: On and Off
Default Setting: Off
Note:
- Depending on your mobile device a Cellular connection may not be available during
Wi-Fi connection to the Dash Cam, hence the recommended setting is off.
39
Summary of Contents for NBDVR300W
Page 1: ...Instruction Manual...
