manualshive.com logo in svg

NextBase 302F, Instruction Manual

Share
Download
NextBase 302F Instruction Manual Download Page 6

CONTROLS

1

2

3

4
5

16 17

18 19

6

8

9

ON CHARGE RESET

NBDVR202

10

12
13
14
15

1

1.   

      Press to confirm selection or to start / stop a
      recording.

2.   POWER

 

      Press and hold for 2 seconds to turn on / off.

3.   IR LEDS
      

Turn on/off within Setup menu to enable 

      enhanced night time recording.

4. 

  

LENS

5.   SPEAKER

6.   MOUNTING POINT
      

Attached supplied windscreen GPS mount here.

7.   GPS SOCKET
    

  Connect GPS aerial cable here.

8

.   MINI USB 2.0 SOCKET

      

Connect car power cable / USB cable here.

9.   MEMORY CARD SLOT
     

 Insert memory card here. Compatible with 

      SDHC <=32GB, Class 6-10.

10. MODE

      Press to select Video / Photo / Playback 
      modes.

OK

11.   UP

        Press to zoom in when in video & photo 
        modes and to navigate up within menus.

12.   DOWN

        Press to zoom out when in video & photo 
        modes and to navigate down within menus.

13.   MENU

        Press to open the Menu within current mode.
        Press twice to open the Setup menu.

14.   MICROPHONE

        Turn on/off within Setup menu to enable 
        audio recording.
 

15.   SCREEN

16.   AV OUT SOCKET (located under dust cover)
        

For use with AV Cable (sold separately).

17.   HDMI MINI SOCKET (located under dust cover)
    

    For use with HDMI Cable (sold separately).

18.   LED INDICATORS
    

    Green = Battery is charging, LED will turn off once 

        the battery is fully charged.
        Red = Power on.

19. 

  

RESET

        

Press to reset the iN-CAR CAM.

      

7

1

Eng

lish

04

Summary of Contents for 302F





















Reviews:

No comments

Brands by name

Popular brands

Load more brands