Pump head installation
>>
Note:
When multiple pump heads are in series, use longer pump head bolts.
6
Operation and installation
Operation and installation
Pump head bolt
Coupling
Positioning column
(The other end of the coupling connected with the output shaft of the motor)
③
Tighten the pump head bolts respectively.
②
Align the Positioning hole with the positioning column of the pump head bracket, and
insert the Pump head bolt;
(The bolts on both sides should be tightened with the same force as much as possible
and not too tight)
①
Insert the pump head shaft into the groove of the coupling;
Warning:
Before installing the pump head, be sure to cut off the power.
Flat shaft
：
Conventional type, used for connecting rubber coupling
(reinforced type).
There are two connection modes of pump head shaft
：
Circular shaft
：
Used for connecting quincunx coupling.
