1. Insert a sprung wooden slat 6 through the first hole
in strap 9. Repeat using another sprung wooden slat 6
and the other strap 9.
2. Attach single sided slat cap 7 onto one end of the
sprung wooden slat 6. Attach another single sided
slat cap 7 onto the other end of the second sprung
wooden slat 6.
3. Attach both sprung wooden slats to the assembled
bed base by inserting each single sided slat cap 7 into
side rails 3 (x2) and using double sided slat cap 8 in
the centre. Once each slat has been inserted into the
slat caps, ensure the double sided slat cap is firmly
pushed into the holes in centre rail 5.
4. Repeat process for all remaining slats and caps
until all components have been used and firmly
pushed in place.
STEP SIX
STEP SEVEN
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 5 of 5
