1. Carefully upright this assembly unit by two person
2. Slide panel 10 into the assembled unit as shown in
diagram.
1. Glue (E) and insert 3 x wooden dowels (C) into panels
1, 7 & 2 and attach panel 3 to panels 1, 7 & 2.
2. Insert 6 x camlocks (B) into panels 1, 7 & 2. and
tighten with a screwdriver.
Ensure the arrow indicator is pointing towards the panel
edge and ensure the assembly bolt locates properly into
the camlock before turning
STEP SEVENTEEN
STEP EIGHTTEEN
1. Insert 16 x fittings (M) into the required position .
2. Insert panels 12 (x2) & 13 (x2) onto the fittings (M) .
3. Use 4 x stickers (O) to cover the camholes on matt
face.
4. Use 4 x stickers (P) to cover the camholes on gloss
face .
STEP NINETEEN
Fin
ish
ed
sid
e
Fin
ish
ed
sid
e
G
los
s s
ide
G
los
s s
ide
Page 8 of 10
