NEXT
PFA
18sHP
/
PFA
18spHP
- User Manual
www.next-proaudio.com
- 4 -
V201610
•
Do not use hardware that isn’t load rated or that its’ rating is not enough to handle the
system’s weight with a good safety factor (minimum 4:1).
•
Suspended systems installation should only be carried out by qualified personnel.
•
Always use adequate protective clothing and equipment to prevent possible injuries.
•
Be sure you understand all local and national regulations regarding equipment
installation.
PFA18sHP POWER AMPLIFIER
AND DSP
The PFA18sHP as all PFA series models, was designed to
achieve a simple to use and deploy versatile system. The
amplifier was designed to power the PFA18sHP with
2200W. The PFA18sHP, like all PFA series models, is
prepared to be completely plug’ n play, having already six
pre-determined configurations that cover almost all
situations. But if you’re not happy with any of those, there
are also two available user defined configurations, which
can be used to adapt the system to your needs using the
NEXT-proaudio SOUNDWARE
1
software and the supplied
RS485 to USB converter.
Here is a brief description of the amplifier panel:
1-
Signal Input/Output
2-
Level Adjustment Potentiometer
3-
Preset Selector
4-
RS485 Communication Interface
5-
List of Available Presets
6-
AC Mains Power Input/Output
7-
Protection Circuit Breaker
8-
Power On/Off Switch
1
Download NEXT-proaudio SOUNDWARE at www.next-proaudio.com/downloads
1
2
3
4
6
5
7
8
Never operate the PFA series Speakers
in a way that maintains the Limiter Led
consistently on.
