background image

®

 50 

 

 

 

Use caution when closing Bullet 

Blender lid- do not close on fingers. 

Use recommended tubes only. 

No user serviceable parts are inside. 

For indoor use only. 

Pollution Degree 2 per EN 61010-1. 

Overvoltage Category II per EN 61010- 
1. 

Enclosure Protection: Not Protected 
Against the ingress of Moisture. 

Sound Pressure Level: Up to 90dBA. 
Use hearing protective devices that 
reduce exposure to below 85 dBA 
during prolonged exposure. 

Do not immerse in liquid. 

Before touching the Bullet Blender, 
touch a bare metal surface to discharge 
static electricity. 

DISCLAIMER 

Next Advance, Inc. makes no 

representations  

 or      warranties, 

expressed,   statutory 

or   implied, 

regarding the fitness or merchantability 
of this product for any particular 
purpose.  In    no  event   shall  Next 
Advance be liable for incidental or 
consequential damages. Next Advance, 
Inc. is not liable for any damages, 
including but not limited to, lost profits, 
lost savings, or other incidental or 
consequential damages arising from 
ownership or use of this product, or for 
any delay in the performance of its 
obligations under the warranty due to 
causes beyond its control. 

Next  Advance,  Inc.  also  reserves 

the right to make any improvements or 
modifications  to  the  product  described 
in  this  manual  at  any  time,  without 
notice of these changes. Next Advance, 
Inc.  products  are  not  designed, 
intended,  or  authorized  for  use  in 
applications  or  as  system  components 
intended  to  support  or  sustain  human 
life,  as  a  clinical  medical  device  for 
humans, or for any application in which 
the failure of the product could create a 
situation where personal injury or death 
may occur. 

All  brand  and  product  names  used 

in  this  manual  are  the  trademarks  of 
their respective owners. 

 

CONTACT INFO 

Next Advance, Inc. 
Averill Park, NY, USA 
Telephone 518-674-3510 
www.nextadvance.com 
[email protected] 

DOMINIQUE DUTSCHER SAS

Summary of Contents for Bullet Blender 50









Reviews: