NXAMP4x1
22
7.
Left (CH1, CH2) PA unit
(Time required: about 15 minutes)
7-1.
Remove the top cover. (See procedure 1.)
7-2.
Remove the CONTROL circuit board and the OPT
angle. (See procedure 2.)
7-3.
Remove the four (4) screws marked [670A], and re-
move the four (4) screw covers marked [660A]. (Fig. 6)
7-4.
Remove the six (6) screws marked [220]. (Fig. 6)
7-5.
Disconnect the connector assemblies that connects the
left PA unit and other units. (Fig. 6)
7-6.
The left PA unit can then be removed. (Fig. 6)
[220]:
Bind Head Screw 4x8 MFZN2B3 (--)
[260]:
Bind Head Screw 4x8 MFZN2B3 (--)
[660A]: Screw Cover T5N (--)
[660B]: Screw Cover T5N (--)
[670A]: Bind Head Tapping Screw-B 3x8 MFZN2B3 (--)
[670B]: Bind Head Tapping Screw-B 3x8 MFZN2B3 (--)
(Fig. 6)
8.
Right (CH3, CH4) PA unit
(Time required: about 15 minutes)
8-1.
Remove the top cover. (See procedure 1.)
8-2.
Remove the CONTROL circuit board and the OPT
angle. (See procedure 2.)
8-3.
Remove the four (4) screws marked [670B], and re-
move the four (4) screw covers marked [660B]. (Fig. 6)
8-4.
Remove the six (6) screws marked [260]. (Fig. 6)
8-5.
Disconnect the connector assemblies that connects the
right PA unit and other units. (Fig. 6)
8-6.
The right PA unit can then be removed. (Fig. 6)
[670A]
[660A]
[660A]
[220]
PA unit
PA unit
[220]
[670B]
[660B]
[660B]
[260]
Summary of Contents for NXAMP4X1
