Nexo Geo M6 Series, System Manual

Page: 21 / 64

GEO M6 HARDWARE SETUP PROCEDURE
System Manual GEOM6
Page 21 / 64
6.2 General Description
GEO M6 “Left” and “Right” configuration
GEO M6 can be installed “Left” or “Right”:
-
“Left” means HF waveguide is left as seen from front
-
“Right” means HF waveguide is right as seen from front.
GEO M6 can be connected to bumpers “Left” or “Right” by simply flipping the cabinets.
Whenever possible, NEXO recommends symmetrical designs (preferably NEXO logo outwards and HF
waveguide inwards in stereo configurations)
GEO M620 “Left” Geo M620 “Right”
GEO M6 modules rigging system
GEO M620 GEO M6Bass
GEO M6B and GEO M620 feature a 3-point rigging system, 2 for front connection, and 1 for rear connection and angle splay
settings.
Angle splay setting sequence is: 0.5° - 2° - 5° - 10° - 15° - 20°
GEO M6 angle setting bar connects 2 x GEO M6 with 2 quick release pins. It can be set upwards or downwards or removed on
user’s choice (independently from “Left” and “Right” configuration):
- If the angle settings bars are set downwards, it will have to be removed from cluster bottom cabinet
- If angle setting bars are set upwards, it will have to be removed when attached to bumper
Below drawings show rear connecting bar configuration according to “left” or “right” configuration.