ACCESSORIES
Page
8
/
18
ePS6
ACCESSORIES
WARNINGS
All ePS accessories are specifically rated in agreement with structural computations.
Never use other accessories when assembling ePS6 cabinets than the ones provided by NEXO: NEXO will decline
responsibility if any component is purchased from different supplier.
PROHIBITED: ePS6 below ePS6 or ePS6 below eLS400 without dedicated accessory
VNU-BUMP
LiftBar, can be used with VNI-WMADAPT.
Remove 2 screws on the top
Screw VNU-BUMP to ePS6 (use only
screws provided with VNU-BUMP).
Tight properly.
Refer to the Product Data Sheet
VNU-HBRK365
Horizontal Cradle, usable with:
VNI-CLADAPT.
VNI-WM200.
VNU-PLADAPT.
Remove the M10 inserts from each side.
Place HBRK365 on ePS6, use only
fasteners provided.
Tight properly.
Refer to the Product Data Sheet
