© 2020-2021 Nexmosphere. All rights reserved. v2.0 / 06-21
All content contained herein is subject to change without prior notice.
N ex m o s p h e re
Le H av re 1 3 6
5 6 2 7 SW E i n d h ove n • T h e N e t h e r l a n d s
T
+ 3 1 4 0 2 4 0 7 0 7 0
E
s u p p o r t @ n ex m o s p h e re.c o m
3
QUICK START GUIDE | XM-350 WITH EM-F4 EXPANSION
API command method
1.
Send the command [PAIR] to the channel you want to pair.
For example: if you want to pair a XF-P3 sensor to channel 112, the API command is X112B[PAIR]
The green LED of the selected channel will start to blink to confirm it is in pairing mode.
2.
To pair: pick-up the sensor you want to pair to the selected channel.
The green LED of the paired channel will be lit continuously for 1 second to confirm pairing was successful.
3.
Right after, the main LED of the EM-F4 base station will blink 3 times to confirm exit of pairing mode.
API command method
1.
Send the command [UNPAIR] to the channel you want to unpair.
For example: if you want to unpair channel 115, the API command is X115B[UNPAIR]
The green LED of the unpaired channel will be lit continuously for 1 second to indicate which channel was unpaired.
Simultaneously, the red Unpair LED of the EM-F4 will be lit continuously for 1 second to confirm unpairing.
Regardless what pairing method is used, an XF-P3 sensor only needs to be paired one time. After a power cycle it will remain
paired. Please note that a sensor can be paired to multiple base stations. So when pairing, please make sure that no other
sensors are accidentally lifted and paired.
Unpairing XF-P3 sensors to EM-F base station
There are two methods to unpair a sensor from a Wireless X-talk channel:
Unpair button
or
API command
.
Unpair button method
1.
Hold control button B for a few seconds.
The red Unpair LED will start to blink.
2.
To unpair: lift the sensor which you want to unpair from the selected channel.
If the picked-up sensor was paired to a channel on the EM-F4, the green LED
of the unpaired channel will be lit continuously for 1 second to indicate which
channel was unpaired. Simultaneously, the red Unpair LED of the EM-F4 will be lit
continuously for 1 second to confirm unpairing was successful.
Make sure the XF-P3 sensors are
switched ON
and that
they
lay still
. The green LED on the sensor will briefly go
on when the device is switched on.
ON
OFF
ON
OFF
ON
OFF
11X
12X
13X
14X
15X
00X
1
API
SB
5V
SD
LED
ERR
XM-350
EM-F4
EM-F4
EM-F4
EM-F4
EM-F4
1
A
B
P
E
2
3
4
1
A
B
P
E
2
3
4
1
A
B
P
E
2
3
4
1
A
B
P
E
2
3
4
1
A
B
P
E
2
3
4
1
A
B
P
2
3
4
E
S
S
S
S
S
S
XF-P3N
EM-F4
XF-P3W
XF-P3B
