Nexigo PJ40, User Manual

Page: 29 / 47

13. Place the projector within a slope of ±15°. Any greater slope
presents dangers of the unit sliding and falling.
14. Avoid obstructions around the projector air vent as this may cause
damage to the unit or create a fire hazard.
15. This unit may be damaged by liquids. Keep liquids away from
the unit to prevent damage. Liquid damages are not covered by the
warranty.
16. If the projector is unused for a prolonged period of time unplug it
from the power source.
17. If there are any mechanical issues with the projector, please
contact NexiGo Support to exercise the warranty; DO NOT attempt to
repair the item yourself.
18. Safe Operational Parameters
●
Operating temperature: b41°F (+5°C) and +95°F (+35°C)
●
Operating humidity: between 30% and 90%
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
FCC REQUIREMENT
EN 27