Nexigo PJ10, User Manual

Page: 26 / 136

WARNINGS
1. Read the manual carefully before you use the projector.
2. Unplug immediately if you notice any issues or problems with
your projector.
If your projector begins to smoke, make unusual noises, or any
strange odor is noticed, immediately unplug your projector. Ensure
that it is placed in an open area with ventilation, away from any
objects that may be a fire hazard. Contact Customer Support for
further details.
3.
Do not remove the projector cover.
This projector contains high voltage circuitry. Inadvertent contact
may result in a severe electric shock and could result in death. Do
not attempt to service this product yourself. Please contact the
manufacturer directly if you have any issues to exercise your
warranty.
4.
Do not modify this equipment.
5. Avoid dropping or throwing the projector.
6.
Do not face the projector lens to the sun.
7. Use only the provided power cable.
8.
Do not place the projector on an uneven or unstable surface, or
one that is subject to vibration.
9.
Do not place this device near another device that produces a
strong magnetic field or one with a heavy electrical load.
10.
Do not look into the lens when the projector is operational. It
may causes permanent eye damage.
11.
Do not turn off the main power abruptly or unplug the projec-
tor during operation. Wait until the fan has turned off before
powering off fully.
12.
Do not attempt to use the projector in a vertical orientation.
13. Place the projector within a slope of ±15°. Any greater slope
presents dangers of the unit sliding and falling.
14. Avoid obstructions around the projector air vent as this may
cause damage to the unit or create a fire hazard.
US 25