background image

Calix 844E - Digital Phone Adapter        3

Installing the Calix 844E

1.  No need to login to the Calix 844E, all the programming has already been taken 

care of for you.

2.  Connect an Ethernet cord from your Internet Source (Modem or Wireless Adapter) 

to the white Ethernet WAN (Eth-WAN) port on the back of the Calix 844E.

3.  Connect an Ethernet cord from one of the Yellow Ethernet LAN ports on the 

back of the Calix 844E to a computer, media or gaming device.

4.  Connect one end of a phone cord to the Phone 1 port on the back of the Calix 

844E. Connect the other end of the phone cord into your phone or cordless 
phone base station.

4.1. Alternatively you can connect the telephone lines at the central location where 

your traditional phone lines enter the residence. (Caution should be exercised 
and an experienced telephone technician should be contracted for this type 
of installation)

5.  Connect the Power supply connector to the “Power” adapter port on the back of 

the Calix 844E and plug the power supply into an available AC power outlet.

6.  Push the ON/OFF switch to ON and allow the Calix to boot-up  

(from 5-10 minutes).

What’s included in the box?

1. Calix 844E - Digital Phone Adapter
2. AC Power Adapter
3. Tabletop Stand
4. Ethernet Cord

2

3

1

4

Summary of Contents for Calix 844E













Reviews: