Nexgrill 720-0783A, Manual

Page: 14 / 24

Fig.13
Fig.14
14
Fig.15
Fig.16
U
A1
A2
N
5. Side Burner Valve Assembly
(a) Insert the side burner valve into the Side Burner
Shelf Control Panel (N). Align the screws on the
valve with the large side of the holes on the bezel.
Slightly loosen the screws without removing the
screws. Slide the screws down to the smaller
holes and tighten the screws to secure.
See Fig. 13.
(b) Insert side burner tube over into the side burner
valve orifice. See Fig.14A1. Use (2) Truss head
screws (BB) attaching side burner to shelf to
make room to install side burner valve.
(c) Push control knob (U) onto valve control stem.
See Fig.15.
(d) Insert the side burner ignition wire to the ignition
module located on the right side control panel.
See Fig.16.
Note: Only need to insert the side burner ignition
wire, the other four wires have been pre-assembled.