Nexgrill 720-0783A, Manual

Page: 13 / 24

3. Side Burner Assembly
(a) Loosen (2) preinstalled head screws from right
side of Firebox (A) as shown. Do not screw out
fully; leave ¼ extended for shelf assembly.
Through side burner shelf keyholes, hang side
burner shelf (N) on two loosened screws. See
Fig. 12.
(b) Using (2) Truss head screws (AA), (2) Flat
washer (DD), attach side burner shelf (N) to
Firebox from inside the firebox. Insert (2) Truss
head screws (BB), (2) Flat washer (EE) to attach
the side burner shelf front panel to the control
panel. Fully tighten the two loosened screws to
secure shelf to firebox.
4. Igniter and Battery Assembly
(a) Remove igniter cover and lock washer from
igniter. Insert igniter through from back of side
burner control panel, secure lock washer from
front of side burner control panel.
(b) Install battery (V) into ignition box with positive
terminal facing outward.
(c) Replace the ignition battery cap after the
battery has been installed. See Fig. 12.
13
Fig.12
Fig.10
A
Fig.11
N
A
Note: Make sure the igniter is assembled with
the wires upward 45
°
, so that the wires are
away from manifold.
See illustration below:
igniter
manifold