8
4.
Drawer
Clapboard assembly
Insert the drawer clapboard (Q) into the slot which under
the first line of glides, attached the clapboard with two
5/32-in. x 10-mm truss head screw with locking
washers (CC) as shown in Fig.5.
5.
Firebox Assembly
Remove the firebox
with main lid
(H) from the carton
and carefully place onto the grill cart as shown in Fig. 6
Note:
Take care when moving the firebox assembly
as the bottom flanges can be bent, which would misalign
the holes.
Attach the firebox
with main lid
(H) to the grill cart using
four 1/4-in. x 12-mm truss head screw
with locking washers(BB)
Note:
Two screws and two washers for each side of cart
as shown in Fig. 7.
Screw
the back of firebox using two
1/4-in. x 12-mm
truss
head screw
with locking washers (BB)
as shown in Fig. 7.
Note:
To
screw
all the above screws from outside to inside.
Grill cart
Q
CC
BB
Fig. 5
CAUTION
The firebox
with main lid
is heavy
and will require two or more people to lift and
position onto grill cart. Failure to do so may result
in back injury.
1/4-in. x 12-mm truss head screw with
locking washer (BB) 6 x
Fig. 6
Grill cart
H
5/32-in.x10-mm truss head screw with
locking washers (CC) 2 x
Fig. 7
H