6
Pack Description
Required
for
assembly
Extra
hardware
Total
AA
1/4-in. x 15-mm Truss Head Screw With Locking Washer
(PDC)
22
2
24
pcs.
BB
1/4-in. x 12-mm Truss Head Screw With Locking Washer
(Stainless
Steel)
18 2 20
pcs.
CC
5/32. x10mm Truss Head Screw With Locking Washer
(Stainless Steel)
2
1
3
pcs.
DD
1/4-in. Flat Washer
(PDC)
22
2
24
pcs.
Before beginning assembly, installation or operation
of product, make sure all parts are present. Compare
parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
y
Estimated Assembly Time: 50 minutes
y
Tools Required for Assembly:
Phillips Screwdriver (not included) and Wrench (not included)
y
Note: The right and left sides of the grill are designated as if you are standing and facing the grill.
1.
Swivel Caster Assembly
Mount the caster onto the bottom panel (A) using sixteen
1/4-
in. x15
-mm truss head screw
with
locking washers
(AA)
and sixteen 1/4-in. flat washers
(DD).
Position the swivel caster
with brake
(C) under the left
rear of the cart bottom (A), and position the swivel caster
(D) under left front as shown in Fig. 1.
Position the two stationary casters (B) should be positioned
under the right side.
NOTE:
Turn over the bottom panel to mount the cast.
HARDWARE CONTENTS
PREPARATION
ASSEMBLY INSTRUCTIONS
Fig. 1
AA BB
CC DD
1/4-in.x15-mm truss head screw with locking
washers (AA)
16 x
1/4-in. flat washers (DD) 16 x
A
C
AA
DD
D
B